HP2-Z18 - Network Infrastructure AIS 2011

Go back to HP

Example Questions

You must configure an HP E-MSM AP to support multiple VLANs for wireless traffic. Which configuration is required on the HP E3500yl switch connected to the AP? When Spanning Tree Protocol is enabled, which devices receive outbound LLDP advertisements from an HP E-Series switch? Which features are available in HP ProCurve Manager Plus (PCM+) but not in HP ProCurve Manager? (Select two.) You must configure link aggregation on an HP E-Series switch with standby links to provide for link redundancy. Which technology is required for this configuration? You must configure port GigabitEthernet 1/0/1 on an HP A-Senes switch so that it can support policy-based VLANs and port-based VLANs Which type of port is required to support this configuration? What is the effect of the following command entered at the CLI of an HP A12500 switch? [A12500] rip Alter using. the Manual Discovery Wizard to add a switch to the HP ProCurve Manager Plus (PCM-) database.PCM+ still not display a configutaiion or the switch. What can you do to obtain configuration information in PCM+? Which HP E-Series switch models display the following prompt in the interface configuration context? (Select two) HP Switch (eth-A24)# Which A-Series switch is designed for the aggregation layer of data centers? You must configure an IPv4 address on an HP A5820 switch Which view enables you to accomplish this task? Ports 1-4 on an HP E3500 yI switch are tagged members of VLAN 44 and untagged members of VLAN 45. What is the effect of the following command? E3500 (config)# trunk. 1-4 trk3 lacp You have entered the following command at the CLI of an HP A5800 switch: [A5800] interface bridge-aggregation 14 Which step is necessary to complete configuration of a link-aggregation group? What is the default version Spanning Tree Protocol on E5406 zI switch? A customer requires that each management user of HP switches has a unique user and password. How can you fulfill this requirement on HP E-Series switches? At a customer site, network administrators report that an HP ProCurve Manager Plus (PCM+) server does not discover any manageable devices except those on the subnet where the server resides. What is a possible solution to this problem? Which link aggregation protocol is supported by HP A-Series switches? Which statements are true about the primary and secondary flash areas of an HP E-Series switch? (Select two) What is the VLAN status of the ports on an HP A-Series switch at factory default settings? Which security technology requires that you set read/write community names? What is the effect of the following command issued at the CLI of an HP E3500-24G yl switch? E3500-24G#show logging 24 What is the maximum number of APs that can be managed by an HP A-WX5004 Wireless LAN Controller? You are designing a wireless network. Why should you choose an Autonomous architecture over Controlled architecture? What is a benefit of the customizable airflow feature on the HP E6600 switch series? How should you install an HP ProCurve manage Plus Remote Client? You have enabled RtPv2 with the following command at the CLI of an HP E3500 yI switch: E3500(config)# router rip E3500(rip)# However, the switch does not locate any RIP peers. How can you explain this result? A network administrator has successfully installed the HP ProCurve Manager remote client on his workstation. He can ping the PCM+ server, but he is denied access when trying to connect to the PCM+ server. The IP address of his workstation is 172.16.17.100/16. The IP address of the PCM+ server is 172.15.15.100/16. How can you resolve this problem? You have defined port 1/0/2 on an HP A7500 switch as a trunk port with VLANS 1, 10, 20, 30 permitted. What is the effect of the following command? [A7500-GigabitEthernetl/0/2] port trunk pvid vlan 30 What is the default IRF priority setting on an HP A-Series switch? How is the first Telnet interface for A-Series switches identified in the CLI? Which command will configure an HP A-Series switch to be the Root Bridge in MST instance 1? You are at the manager level prompt In the CLI of an HP E3500 yI switch. Which options are available at this prompt? (Select two) What is the default Spanning Tree Bridge Priority on an HP E3500 yI switch? You must enable Secure HTTP (HTTPS) to encrypt web-based management traffic on an HP E-Series switch. The switch is at default settings. What must be installed or enabled to apply this solution? After issuing the following two CLI commands, how can you gain access to the CLI of the switch if the manager and operator passwords have been lost? E5406 (config)# no front-panel-security password-clear E5406(config)# no front-panel-security factory-reset Which features of the HP E5400 zl swith series require installation of a Premium License? (Select two) You must determine whether routing has been enabled on an HP E 5406 zl switch. Which commands provide this information? (Select two.) The output of show spanning-tree instance 3 on two HP E8212 zI Switches indicates that both switches are the Root of MST instance 3. What is an accurate explanation for this output? Port B1 on an HP ProCurve 5406zI switch is an untagged member of VLAN 155 and not a tagged member of any VLAN PortC1is a tagged member of VLAN 155 and an untagged member of VLAN 100. You issue the following command: 5406zl (config)# no vlan 155 Why do you receive the following prompt? The following ports will be moved to the default VLAN: B1 Do you want to continue? [y/n]: After issuing the following two CLI commands on an HP E5406 zl switch, how can you gain access to the CLI of the switch if the manager and operator passwords have been lost? E5406(config)# no front-panel-security password-clear E5406(config)# no front-panel-security factory-reset After using the Manual Discovery Wizard to add a switch to the HP ProCurve Manager Plus (PCM+) database, PCM+ still does not display a configuration for the switch. What can you do to obtain configuration information in PCM+? You must design and configure a Spanning Tree solution using HP E-Series switches. Why is it necessary to ensure that all VLANs defined on the switches are carried on all switch-to-switch links? What is the effect of the following command, entered at the CLI of an HP A7500 switch? <A7500> boot-loader file cf:/A7500.bin main How can you access the management interface of an HP E-MSM422 AP at factory default settings? Which view is indicated by the following prompt on an HP A7500 switch? [A7500] What is the default load-balancing behavior for Layer 2 traffic forwarded over aggregated links on an HP A-Series switch? Which remote management interface on an E-Series switch can be secured by enabling Secure Sockets Layer (SSL)? What are the advantages of deploying 802.11n wireless technology instead of 802.11a technology? (Select two.) Which command is used to show all VLANs not assigned to user-defined MST instances? Port B1 on an HP ProCurve 5406zl switch is an untagged member of VLAN 155 and not a tagged member of any VLAN. Port C1 is a tagged member of VLAN 155 and an untagged member of VLAN 100. You issue the following command: 5406zl(config)# no vlan 155 Why do you receive the following prompt? The following ports will be moved to the default VLAN: B1 Do you want to continue? [y/n] : You are the network administrator at a company with multiple remote sites. You are using HP ProCurve Manager Plus (PCM+) to manage network devices in all of the company's offices. How can PCM+ remote agents help manage your network?