HP0-J62 - HP Storage Solutions Foundation

Go back to HP

Example Questions

Which tap technology prevents data from being overwritten and is used for long-term archiving? Which SCSI IDs are available for narrow SCSI devices? A company needs to lower operational, power, and cooling costs while preserving their existing Ethernet and Fibre Channel infrastructure. To achieve this goal, they plan to reduce the number of sperate adapters and cables required in their data center. What can they use to achieve this goal? A customer is planning unattended backups of multiple branch offices. They do not need off-site storage, but rapid restores are essentials? Which backup storage technology should they implement? A company needs a solution that provides storage only as needed. The company┬┤s goal is to reduce capital expenditures and lower the power and cooling overhead to reduce operating expenditures. Which type of storage implementation meets these requirements? A company produces petabytes of data and the amount increases daily. They require a storage solution that can scall storage capacity and processing power as the data increases. A company has a SAN with storage array has configured the LUN with RAID. The company needs local physical copies of the LUNs. Which technology should the company use? What is the purpose of LUN presentation? A customer wants to enable a long distance (50km/31miles) replication for their FC-Based enterprise storage solution. Because of budget restrictions, they want a low-cost solution that supports replication. Which type of solution meet these requirements? In addition to performing backup to disk, for which other operation can an HP StoreOnce NAS share be used? What should run on servers that share access to the same P2000 G3 MSA storage LUN to preserve data integrity? Which SCSI bus specification supports a maximum distance of 12 meters? What is a main difference between Small Form Factor and Small Form Factor Pluggable plus modules? A telecommunications company needs to respond quickly to increased bandwidth demands and protocol changes over their existing fiber infrastructure. They need to cover a short distance at minimal cost. Which multiplexing technology should this company implement? A system administrator is configuring an array with 48 drives. The array stores mission-critical data for an application that requires large logical volumes. The array must support simultaneous failures of any two drives without downtime or data loss. How must the RAID level be configured to meet these requirements? Which drive technology uses flash memory and protects against environmental impacts on the drive? HP StoreOnce Backup Systems support CIFS and NFS protocols. Which benefits result from this support? Which hash based algorithm for storage deduplication provides the lowest risk for hast collisions? A network administrator needs to consolidate cables, adapters, and switches in a mixed Ethernet and Fibre Channel environment. Which protocol enables the administrator to accomplish this task? A company uses Fibre Channel over Internet Protocol (FCIP) to connect their Fibre Channel fabrics into a unified, single-fabric SAN. The company requires high availability and performance in their storage environment. Which type of inter-switch Link (ISL) configuration should the company implement. A company has deployed a large tie share, and expects 100 GB of new or changed data each day. The company would like to backup all objects in the file share and restore the share as quickly as possible. The company would share and restore the share as quickly as possible. Which technology should the company use? Which function of SNMP enables information to be collected? A company is using several RAID 5 volumes for their data. To decrease the risk of a disk failure, they want to add a single drive to their HP StoreSure 2000 Storage array as an automatic replacement for the failed disk. What is the name of the automatic replacement? A customer wants to upgrade their backup architecture and is considering a backup-to-tape solution. They want to achieve the highest performance possible with this solution. Which critical performance factor should they consider when choosing a tape device? Your customer wants a multi-site P4000 configuration across campuses. Site protection has to be implemented where retention of full site data is possible when there is loss of communication between sites. Which HP P4000 functionality supports this requirement? Which feature of SNMP defines the structure of the SNMP response relative to a device subsystem? A company needs a solution that provides storage only as needed. The company's goal is to reduce capital expenditures and lower the power and cooling overhead to reduce operating expenditures. Which type of storage implementation meets these requirements? Which device typically has a SCSI ID of? A customer is planning attendant backups of multiple branch offices. They do not need off-the storage. But rapid redistributes are essentials. Which backup storage technology should they implement? A system administrator needs to locate storage resources on an IP network by using an iSCSI initiator to query for a list of targets. What should the administrator use to accomplish this goal? A administrator is configuring an array with 48 drives. The array stores mission-critical data for an application that requires large logical volumes. The array must support simultaneous failures of any two drives without downtime or data loss. What is one similarity regarding how CIFS shares and NFS shares can be used? Which device typically has a SCSI ID of 7? A company has deployed a large file share, and expects a large amount of data to change each day. They would like to minimize the backup window for the file share Which type of nightly backup should the company implement? In addition to performing backup-to-disk, for which other operation can an HP StoreOnce NAS share be used? Which benefit does a SAN storage solution provide? A customer needs to connect a dedicated file sharing storage device to an existing LAN infrastructure at an affordable cost. Which type of storage solution meets these requirements? A system administrator os managing a massively-scalable high performance storage system. The administrator needs to create virtual private arrays with advanced workload segregation without compromising performance. A business is growing from a small, tightly control SAN environment to a much larger configuration that is dynamic and may require connections to be moved from one port location to another. Which zoning configuration would best meet the needs of this business? What is a main difference between Small Form Factor Pluggable (SFP) and Small Form Factor Pluggable plus (SFP+) modules? The system administrator plans to migrate a RAID 1 volume to RAID5. What is required to migrate the volume successfully? Your customer wants a multi site P4000 configuration across campuses. Site protection has to be implemented where retention of full site data is possible when there is loss of communication between sites. Which HP P4000 functionality supports this requirement? A company uses Fibre Channel over Internet Protocol (FCIP) to connect their Fibre Channel fabrics into a unified, single-fabric SAN. The company requires high availability and performance in their storage environment. Which type of inter-switch link (ISL) configuration should the company implement? Which task is performed in the first stage of a storage infrastructure assessment? A mid-sized company with a small virtual tape library needs to implement a low-cost deduplication strategy. The data to be backed up is in a variety of formats and is not mission-critical. Which deduplication technology meets this company's requirements? What is one of the key advantages of converged network adapter (CNA)? A company has a SAN with storage array has configured th LUN with RAID. The company needs local physical copies of the LUNs. Which technology should the company use? Which benefits do autonomic management and storage tiering provide? (select two) Which component is the same for both SAS and SATA drive technologies? A customer wants to enable a long distance (~50km/31miles) replication for their Fibre Channel- Based enterprise storage solution. Because of budget restrictions, they want a low-cost solution that supports replication. Which type of solution meet these requirements?