HP0-J43 - Designing and Implementing HP SAN Solutions 
Go back to HP
Which HP tool can be used to gather relevant SAN data from hosts, interconnect devices, and storage devices?
HP Configuration Collector
To ensure correct device discovery while implementing a simple SAN, what is the HP recommended timing for powering up the online storage?
before the tape library
Which additional feature should be presented to a customer for an HP StorageWorks 8/8 SAN Switch when presenting the upgrade path to a Full Model option?
Which license-enabled functions of the MPX200 Multifunction Router are supported with EVA storage systems? (Select two.)
A customer needs a SAN design to support their business continuity approach. Which technical key factors should be implemented in a SAN design?
eliminate single points of failure
How can an engineer determine the type of licenses installed on a B-Series switch using CLI commands?
What is a best practice when interconnecting the switches in the fabric?
Label all connections for easier troubleshooting.
Which C-Series switch integrates Fibre Channel 2, 4 and 10Gb technology and IP Storage Services for iSCSI and FC over IP?
Which limitation applies to a B-Series SAN concept when designing inter-switch links (ISLs)?
A maximum of one half of the total port count can be configured to the same destination switch.
What must you do to enable NPIV on QLogic HBAs on systems running VMware ESX 4.0?
No action is required because the supplied QLogic driver has NPIV enabled by default.
What is the advantage of Access Gateway Mode using B-Series switches?
They connect to vendor switches that support NPIV.
What is the benefit of using the internal FTP server in DCFM?
The Firmware Repository is available for firmware management
Which port type is used by building an LSAN on supported B-Series 8Gb SAN Switches to provide the routed paths between an interoperable routed fabric?
Which optional license upgrades are required to connect 16 ports, including an E-port to a StorageWorks 8/8 Base SAN Switch? (Select two.)
HP StorageWorks 8/8 and 8/24 SAN Switch 8Gb 8-port Upgrade
What are advantages of HP Nexus 5000 Converged Network Switches? (Select two.)
support lossless Ethernet fabric
connect FCoE to native Fibre Channel
Which benefit does Cisco Fabric Manager provide to customers using MDS switches?
performance monitoring using SNMP
Which device is recommended to be powered on first in a SAN fabric?
Which tools can be used to document a customer's SAN? (Select two.)
HP Configuration Collector for SAN
HP SAN Visibility
After installation of an HP StorageWorks SN6000 Fibre Channel switch there is an over-temperature error condition. How is this indicated by the switch?
Heartbeat LED display blinks.
A customer wants Director-class features, requires only 128 ports and a cost-effective solution. Which HP solution meets these customer requirements?
HP StorageWorks DC04 Director
While analyzing an existing SAN, a Network Storage Router (NSR) is identified in the fabric. Which HP backup solution uses an NSR?
Which statements are true about designing a remote replication environment with Enterprise Virtual Arrays and MPX200? (Select two.)
Each EVA storage system can connect to a maximum of one MPX200 chassis.
MPX200 FC connections can be direct connected to an EVA controller host port.
Which MPR switch model is included in the EVA iSCSI Connectivity Option and can be used for all EVA systems?
What is a feature of Cisco MDS 9000 Enterprise Package Software?
Which disaster recovery solutions are supported by B-Series 1606 Extension SAN Switches? (Select two.)
Continuous Access EVA
XP Continuous Access
Which task should be part of a customer survey to identify customer needs and to obtain additional information?
gather I/O profile
Which HP StorageWorks software provides the essential functions for the efficient configuring, monitoring, and dynamic provisioning of SAN fabrics?
Data Center Fabric Manager Enterprise
When should you begin documentation?
during the planning stages
Which Cisco software package maintains up-to-date discovery information on all configured fabrics?
Fabric Manager Server
When powering down the SAN, what is an exception that would change the power down sequence?
A server is needed to run device management software.
What is a customer responsible for during the HP Assessment Service for SANs?
allowing the installation of HP's proprietary toolset
When troubleshooting a C-Series SAN fabric, which command can be used to display the switch port status and error information?
Which Microsoft command can be used to find an SMTP server IP address when configuring HP SAN Visibility?
Which HP SAN infrastructure technology does the B-Series MP Router support?
SAN-iSCSI bridging technology
Which features of C-Series switches can also be used in conjunction with FCIP to create more efficient business continuity and disaster recovery solutions? (Select two.)
Quality of Service (QoS)
Which CLI commands are used to gather information needed to escalate fabric problems? (Select two.)
show tech-support on C-Series switches
create support on H-Series switches
Which feature of B-Series switches provides connectivity to B-Series or other switch series fabrics?
Access Gateway Mode
Which upgrade path should be presented to a customer for an HP StorageWorks 8/8 SAN Switch to enable the maximum number of ports?
upgrade to 24 ports using 8-port license upgrades
Which software license must be purchased by a customer if Quality of Service (QoS) is needed in C - Series switches?
Enterprise Package Software
Which B-Series switch provides 24 FCoE ports operating at 10Gb/s and 8 FC ports operating at 8Gb/s?
HP StorageWorks 2408 Converged Network Switch
Which task included in HP Enhanced Implementation Service for SANs is performed by the project manager?
develops the project plan, which defines the scope of the services to be delivered
Which management interface should a consultant present a customer who wants to integrate a new SAN infrastructure and have a topology view, drag-n-drop zoning administration, and automatic switch and HBA update notifications?
Simple SAN Connection Manager
Which factors enable a higher return on investment (ROI) when implementing a SAN infrastructure? (Select two.)
increased system availability
more efficient capacity utilization
Which command is used to verify the dynamic load sharing state in B-Series switches?
What is a benefit of connecting servers to the SAN one HBA at a time?
verifies the HBA logs into the fabric properly