E20-530 - Network Storage - SAN Specialist

Go back to EMC

Example Questions

In a Log-file of the Connectrix Manager you will find this Fibre-Channel address of a node: 6B1613 To which port will this node be connected? How many switching modules (line cards) can be inserted into the MDS-9509 Director? Which database service needs to be verified if EMC VisualSAN 4.0 displays errors on program start? Which two [2] MDS models would you recommend to allow future growth? A host running PowerPath, attached to a CLARiiON, is migrated to a new switch connected to the same CLARiiON. What are two [2] actions required to complete the migration? When scaling a FCIP extended network, what must be taken into account prior to merging the SANs? The PowerPath command, powermt, has reported a number of devices as dead. Which commands are used to remove the dead devices? You are connecting a SAN Gateway to a Fibre Channel Switch. The WWN of port 8 on the Gateway is: 10:00:00:60:45:16:0A:0D Which WWPN would appear on the switch for this port? Which two [2] features apply to both the MDS-9120 and the MDS-9140 switches? Which native command on a B-series switch will provide data for EMC Customer Service? Which two [2] topology port classes are supported by all B-series products? PowerPath was successfully installed two weeks ago on a Solaris 2.8 host. The host is now reporting stack overflow messages. Which two [2] events can cause this problem? What step must be performed to introduce new switches into a ControlCenter infrastructure? ControlCenter Performance View statistics for switches displays gaps after adding new switches. How can these gaps be eliminated? Which is an MDS 9000 auto-learn option? Which view of Workload Analyzer will provide the aggregate utilization of all FA ports in the Symmetrix? How many ED-140M directors can be mounted in a single EC-1200 cabinet? Which command is used to notify PowerPath Volume Manager (PPVM) of a BCV device state change? From Connectrix Manager, which two [2] levels of user rights can be assigned to specific users? How many DS-32M2 switches can be mounted in a single EC-1200 cabinet? Which two [2] statements describe port binding? Which two [2] management tools have SAN zoning capabilities in a McDATA environment? In a McDATA environment, which software allows for I/O threshold alerts to be configured? Which M-series products allow attaching Arbitrated-Loop Devices? How many buffer-to-buffer (BB) credits can be used on ports 4-23 in a DS-24M2 switch? You have added two McData DS-32M switches at a remote location without a service processor and DSM-Connect on the ControlCenter infrastructure server. You have been unable to discover the DS-32M switches using SAN Manager. What action is needed? Where is LUN masking information stored in the Symmetrix? What is the recommended minimum amount of memory in a management station for an EMC VisualSAN 4.0 installation in a mid-sized SAN? Which option is used to prevent mirroring at the host level if the device is already mirrored at the storage level in a PowerPath Volume Manager 4.x environment? Which property must be edited to bestow full EMC VisualSAN 4.0 administrative privileges to a network user who does not possess network administrator privileges? How many ISLs are required to implement an extended distance IP solution in a MDS-9509 Director? Which statement about the MDS 9000 32-port switch module is correct? After a Connectrix Manager upgrade, SAN Manager is unable to perform zoning operations. What needs to occur to enable zoning operations? A customer has attached a FC-AL tape drive to a fibre channel switch. During FLOGI, as which type of FC port will the switch identify the drive? How many M-series Products on a single service processor can be supported by Connectrix Manager? Where are available zones stored when using Connectrix Manager to add a zone to an existing fabric? In which SAN Manager folder are inactive zones maintained? Which two [2] statements apply to the MDS IP Storage Services Module? When are zoning changes made to an inactive zone set with the native DS-16B2 switch tools reflected in EMC VisualSAN 4.0? How many bits does a WWN contain? Which Fibre channel address is reserved for the Directory Server? Which describes the non-blocking architecture deployed in M-series switches? Which is required to implement Windows-based servers in an iSCSI SAN? Which is an EMC recommended best practice when doing fabric zoning? Which two [2] UNIX utilities are used to test network connectivity? A customer has plugged a new host into his SAN but cannot see the HBA WWNs appear in the Topology. What are two [2] ways to resolve? What is the reserved address of the Fabric controller? In either a UNIX or windows environment, which command is used to display status and configure PowerPath? How many ports can be in one trunking group on a B2-series (Brocade 3x00 series) switch or director? In this implementation, gateways are used to connect existing Fibre Channel devices to an IP network, and as such will include physical interfaces for which two [2] networks?