C_TSCM42_66 - SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP6
Go back to SAP
What are characteristics of repetitive manufacturing? (Choose three)
Production without using production orders and without status management
Continuous material consumption, production flow and output
Period-based planning of the quantities to be produced
When maintaining a work center, formulas can be assigned in the scheduling view. Formulas use formula parameters for calculation. What can be the origin of the formula parameters used for scheduling? (Choose three)
User-defined fields in the operation of routings
General operation values of routings
Standard values in the operations of routings
What are the consequences of setting a production order to Technically Complete (TECO)? (Choose three)
The order is no longer relevant for material requirements planning.
Capacity requirements are set to null.
Reservations are no longer relevant for material requirements planning.
What do you have to consider when you use SAP ECC long-term planning (LTP)? (Choose two)
A planning scenario must be released before it can be used in LTP.
Reorder point planned materials can be included in LTP.
Where in the SAP ECC system can you define production versions?
In the material master
Which types of objects can be changed with Engineering Change Management (ECM)? (Choose three)
Bill of material
You use a planning time fence and fixing type 1. You receive a customer order with a material availability date within the planning time fence. What do you have to consider in this scenario?
Planned orders that are created by requirements planning are shifted to the end of the planning time fence.
A material was planned in the context of SAP ECC material requirements planning. The MRP controller subsequently processed the material by manually converting a specific planned order into a production order. The MRP controller now accesses the current stock/requirements list and the MRP list for this material and compares these two lists. What do you have to consider for the two lists at this stage? (Choose two)
The stock/requirements list was updated the moment it was accessed.
The stock/requirements list displays the production order.
The availability check during production order creation should use a different scope of check than during order release. How can you fulfill this requirement?
Maintain appropriate checking rules in checking control for order creation and order release.
You select the master data for production orders via production versions. Which information is contained in a production version?
The routing and BOM alternatives to be used
Which issue can occur if the lot size-dependent in-house production time in the material master is not updated after changing the routing?
Dependent requirements request the components from the bill of materials at wrong times when using basic dates scheduling.
You want to create a new material that - is kept in stock- is externally procured- is used as a component in the bills of material for various final products- must not be sold directly Which standard SAP material type do you use?
ROH (raw material)
Which of the following statements best defines SAP ERP?
SAP ERP is an application that a company can use to manage its business processes efficiently.
When modeling in-house production using SAP ECC, on which business levels can you create a bill of material (BOM)? (Choose two)
At the plant level
At the client level
In SAP ECC, you calculate the standard available capacity for a work center capacity using the following data: - Start: 7:00:00 a.m. - End:3:00:00 p.m. - Break duration: 1 hour - Rate of utilization: 80% - Overload:110% - Number of individual capacities: 1 How large is the standard available capacity?
What data can be posted directly via the Plant Data Collection (PP-PDC) interface?
What features related to process orders can be used to fulfill Good Manufacturing Practices (GMP) requirements? (Choose three)
Approved master recipes
Electronic batch record
What do you have to consider regarding lot size procedures?
The lot size quantity can be influenced using a minimum lot size and the rounding profile.
Which option for selecting a routing exists when you create a production order?
Manual selection based on settings in the order type-dependent parameters
The stock/requirements list for a finished product contains only one sales order and one fixed planned order with the same quantity. The availability dates for both MRP elements are on working days. The availability date for the fixed planned order is set to a later date than the one for the sales order. However, a corresponding rescheduling exception message does not appear. What could be the reasons? (Choose two)
The delta between the availability dates falls within the tolerance window defined in Customizing.
The fixed planned order is outside the rescheduling horizon.
Which Customizing element controls the determination of planned costs in production orders?
Which activity can trigger an automatic availability check for the components of a production order?
Which property applies for consumption with planning strategy 40 (planning with final assembly)?
Consumption can increase the total originally planned production quantity.
Your customer does not want to manage value-intensive materials in the warehouse. These materials should be procured directly for the production order. Which BOM item category must you set to fulfill this requirement?
N (non-stock item)
In what sequence are the steps of material requirements planning performed in SAP ECC?
1. Net requirements calculation 2. Lot sizing 3. Determination of the procurement type 4. Scheduling
Which function is supported by production orders?
Automatic creation of transfer orders at order release
You create a routing that includes five operations in an initial sequence (10, 20, 30, 40, 50). When capacity bottlenecks occur, you want to use a second sequence on other work centers for operations 30 and 40. Which sequence category do you use to create the second sequence in the system?
What do you have to consider, when you use the ATP (Available To Promise) checks for material? (Choose two)
ATP checks can be carried out automatically when releasing a production order.
ATP checks can be adjusted to also consider future requirements and receipts.
During a project phase, your customer raises some questions concerning parameters of the procurement type in the material master in the SAP ECC system. Which of the following procurement type properties are valid? (Choose two)
If both procurement types are allowed with entry X (both procurement types), requirements planning assumes in-house production.
If procurement type E (in-house production) is set, external procurement may still be possible, depending on the material type.
You have maintained planning strategy group 10 (make-to-stock production) in the material master (SAP ECC) of a material. For the coming months, you have planned requirements with requirement type LSF (derived from main strategy 10). Now, you want to change the requirement type from LSF to VSF (in accordance with planning strategy 40, planning with final assembly) for requirements in the existing production plan. Which of the following scenarios are applicable in this case? (Choose two)
You can enter the strategy group 40 in the material master, but the requirement type is not changed automatically for existing requirements.
You can enter the strategy group 40 in the material master and change the present requirement for the product manually in the production plan.
When analyzing the SAP ECC order report for a planned order for a finished product, you discover that one of the assemblies will not be available in time for the scheduled final assembly because of automatic forward scheduling. Which planning procedure do you use to create a feasible production plan from a requirements planning perspective?
Multi-level single-item planning with the "simulation mode" option
What do you have to consider regarding consumption? (Choose two)
Consumption can take place between order reservations and planned independent requirements, depending on the strategy.
Consumption parameters (consumption mode and consumption interval) can be set in the material master or in the MRP group.
An enterprise based in the US produces an end product that is used with the unit of measure "pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that the material can be sold with the unit "kilogram" (KG). What is the easiest way to fulfill this requirement?
There is no need to take any action. In this scenario, the conversion of units of measurements is done automatically.
Which of the following master data can be used with process orders? (Choose three)
Which of the following features are offered by MRP areas in SAP ECC? (Choose two)
An MRP area may include different storage locations.
Subcontracting is supported by MRP areas.
In the Customizing for requirements planning, a project team notices that the alternatives P1, P2, P3 and P4 are also delivered as standard in addition to MRP type PD. The number in each of these alternatives represents a firming type. What does a firming type define? (Choose two)
Handling existing procurement proposals within a planning time fence.
Handling new procurement proposals that need to be created due to new requirements within the planning time fence.
Which of the following requirements is supported by using process orders?
Documentation of the production using an electronic batch record
Which of the following master data is necessary for the creation of material reservations for production orders?
Material master records
Which activities lead to a reduction of the capacity requirements for an operation? (Choose three)
Confirming the operation
Setting the status technically complete (TECO)
Reducing the order quantity
What can you use to organize material staging for production orders? (Choose three)
You want to use the function "Read PP master data" in the production order. However, while calling the function you receive an error message. What could be the reason?
Goods movements have been posted.
What sequence do you follow in master data maintenance to define the production of a material?
Create BOM -> Create work centers -> Create routing -> Carry out component assignment in BOM or routing
You want to plan a finished material using material requirements planning in an SAP ECC system. The resulting planned orders should be scheduled using basic date scheduling (not lead- time scheduling). Which of the following properties for the resulting dependent requirements applies?
In multi-level backward scheduling, dependent requirements are triggered at the start date for the planned order of the finished material.
Which of the following properties about the planning functions available in SAP ECC applies?
Master production scheduling (MPS) refers to preferred planning of important materials.
Which of the following activities within the KANBAN procedure normally triggers subsequent stock posting of the goods receipt?
Set "Container full"
What functions can you use for suboperations? (Choose two)
What master data do you need for material replenishment using the KANBAN procedure? (Choose two)
Production supply area
What could be a consequence of confirming an operation?
The capacity requirements are updated
Your customer tests the firming options for planned orders in SAP ECC using a test material. Therefore, the customer sets a firming date in the stock/requirements list manually. Additionally, the customer sets a planning time fence with firming type 1 in the material master. How is the resulting firming interval specified in this scenario?
By the firming mechanism with the longer firming interval
Where can you define the valid receivers for production order costs?
In the settlement profile