C2010-599 - IBM Storage Productivity Center V5.1 Implementation
Go back to IBM
In the stand-alone GUI, which panel should a customer open for edit, run, delete, or rename schedules?
A database repository will be installed on a separate server (B) from the server (A) where other components of IBM Tivoli Storage Productivity Center V5.1 (TSPC) are installed. These four tasks must be completed in which order to have a successful installation and a fully functioning multi-server environment? 1. Run the TSPC installation program on server A to install all the required components of TSPC except the database repository. 2. Install the IBM DB2 server on server B. 3. Install the IBM DB2 client on server A. 4. Run the TSPC installation program on server B to install the database repository.
To configure IBM Tivoli Storage Productivity Center V5.1 to send traps and IBM Tivoli Enterprise Console (TEC) events, information is entered for the two SNMP destinations and one TEC event destination into the content pane. Where is this information entered in the GUI Navigation Tree?
Administrative Services > Configuration > Alert Disposition
A customer has an AIX V5.3 system with 8 GB of memory, 15 GB of available disk space, and 4 processors at 2.3 GHz. An installation of IBM Tivoli Storage Productivity Center V5.1 (TSPC) server fails. Why?
The TSPC server requires AIX V6.1 or later.
A storage administrator adds a network attached storage filer via one Storage Resource Agent. After setting the Scan/Probe Agent Administration, which group contains the filer so it can be probed?
Retention periods must be set to establish how long data collected by IBM Tivoli Storage Productivity Center V5.1 will be kept. The retention period can be configured for which assets?
During the uninstallation of IBM Tivoli Storage Productivity Center V5.1 in Linux, this error message is displayed: Cannot uninstall component Device Server: Reason: Port 9550 is in use. Make sure component has shutdown then click next to continue. This indicates that the device server is still running. What is the correct path and file to run to stop the device server so that the uninstallation can conclude?
Which storage system is supported by the storage optimizer in IBM Tivoli Storage Productivity Center V5.1?
What does Removed Resource Retention specify in IBM Tivoli Storage Productivity Center V5.1 (TSPC)?
How long to keep information for resources that are no longer monitored by TSPC.
In which scenario would a customer need to install IBM Tivoli Storage Productivity Center V5.1 in silent mode?
The customer is running from a terminal that cannot display graphics.
What is the default location for installing a Storage Resource agent on a Linux system?
Where can the user see the imported quotas from a network attached storage (NAS) filer?
Data Manager > Policy Management > Network Appliance Quotas > Imported User Quotas
What is one policy used by the Configuration Analysis tool?
Each connected computer and storage system port must be in a least one zone in the specified zone sets.
The IBM Tivoli Storage Productivity Center V5.1 (TSPC) administrator schedules batch jobs to automatically generate reports. Where can the TSPC administrator go to see how the batch jobs ran?
IBM Tivoli Storage Productivity Center > Job Management
Which checkbox checks the health of a new SMI-S agent while it is being configured in data sources?
test CIMOM connectivity before adding
When installing IBM Tivoli Storage Productivity Center V5.1 (TSPC), where can the TSPC administrator find a list of supported disk and storage area network hardware?
the IBM Support portal
Where are the default log files located for the data server or device server on a Windows system? (Choose two.)
What are the correct steps to disable the Resource History Retention job?
Administrative Services > Configuration > Resource History Retention > No History
What action does the IBM Tivoli Storage Productivity Center V5.1 (TSPC) administrator take to view the status of TSPC services?
Expand Administrative Services > Services
A Windows server has a Storage Resource Agent installed and configured. Batch reports have been created on the IBM Tivoli Storage Productivity Center V5.1 server and configured to store reports on the agent system. What is the default report location?
Errors are encountered during a new installation of IBM Tivoli Storage Productivity Center V5.1 (TSPC). To resolve the malfunctioning installation the Service tool can be used to collect information from all currently installed TSPC components. What is the correct default directory on Windows operating systems where the service data is collected?
Which file contains the installation status of all installed IBM Tivoli Storage Productivity Center V5.1 components?
How can a user verify if there are any Storage Resource Agents that need to be upgraded?
Go to Administrative Service > Data Sources > Data\Storage Resource Agents and check the Version column to make sure it is the same asthe latest build.
Which IBM Tivoli Storage Productivity Center V5.1 (TSPC) license should the customer have in order to access/use all TSPC functionality?
TSPC Advanced Edition
Which command sources the IBM DB2 instance db2inst1?
An IBM Tivoli Storage Productivity Center V5.1 administrator is viewing a server service log file and wants to search for a string value. What action is taken to search the server service log file?
enter the string value in the Search for box at the top of the log file display
During the planning process for a new IBM Tivoli Storage Productivity Center V5.1 implementation, the customer decides that two servers, a master and a subordinate, are necessary to stay within the recommended maximum of unique data sources to be monitored per master server. The customer is planning to run rollup reports of the entire environment after deployment. Given that this number includes subordinate servers, Storage Resource agents, CIMOM agents, and VM servers (VMWare), what is the recommended maximum number of unique data sources for a master server?
A storage administrator user runs into a problem with a Storage Resource Agent (SRA) (hostname: SRA_RH) installed on a Red Hat V5.3 operating system. To run the Service tool on this SRA, the user takes these steps: -- Logs into the stand-alone GUI. -- In the navigation tree, expands Administrative Services > Data Sources > Data/Storage Resource Agents. -- In the content pane, selects the agent SRA_RH and from the Select Action menu, clicks Collect Service Data. Where is the compressed file created?
Which panel can specify how far back to keep a history of the data collected by IBM Tivoli Storage Productivity Center V5.1?
Resource History Retention panel
Filesystems information history can be retained based on which two pre-defined frequency parameters in the Resource History Retention? (Choose two.)
How are Storage Resource Agents (SRA) upgraded in IBM Tivoli Storage Productivity Center (TSPC)?
SRA upgrades can be scheduled from the TSPC stand-alone GUI.
In IBM Tivoli Storage Productivity Center V5.1 stand-alone GUI, where can the status of a performance monitoring job be checked on a switch that is still in progress?
In IBM Tivoli Storage Productivity Center > Job Management panel,under Schedules section,select the Performance Monitoring job,and thenView Log Files under Jobs for Selected Schedule section.
Which IBM Tivoli Storage Productivity Center (TSPC) license packages are available for TSPC V5.1?
TSPC,TSPC Select Edition,and TSPC Advanced Edition
Which user can log into the IBM Tivoli Storage Productivity Center V5.1 (TSPC) Web and legacy user interface and can use all TSPC functions or the Advanced Edition license?
an OS user that belongs to the Administrators group
When saving a customized Cognos report, which two folders are available? (Choose two.)
A customer wants to install IBM Tivoli Storage Productivity Center V5.1 components on a separate computer. Where are those files located by default on a Windows operating system?
The display of IBM Tivoli Storage Productivity Center V5.1 (TSPC) server service log files does not automatically update as new entries arrive in the log file. What is the recommended action the TSPC administrator should perform to refresh the log file display?
click the Refresh button at the top of the log file display window
In the Alert Disposition panel, which fields are presented to configure IBM Tivoli Storage Productivity Center V5.1 (TSPC) to send e-mail alerts?
Mail Server,Mail Port,Default Domain,Return To,Reply To
What is the functional purpose of the Configuration Analysis tool in IBM Tivoli Storage Productivity Center V5.1 Advanced Edition?
to determine whether a current storage area network (SAN) configuration complies with predefined best practices
The Data Server service includes the various components that run in the IBM Tivoli Storage Productivity Center V5.1 for Data Server. Configuring tracing is done by setting the debug level and log file characteristics. Within the navigation tree pane, expand Administrative Services > Services > Data Server. Which two components can be selected for configuring tracing? (Choose two.)
What is the only supported IBM Tivoli Storage Productivity Center V5.1 database backup method for a default installation?
offline database backup
In IBM Tivoli Storage Productivity Center V5.1 stand-alone GUI, which path indicates a performance monitor SwitchCiscoPM that was created by user adm?
Fabric Manager > Monitoring > Switch Performance Monitors > adm.SwitchCiscoPM
Which panel can specify how often the system captures snapshots of a configuration and when to delete them?
A customer has scheduled daily tasks and batch reports and needs to check for any issues. What are two ways issues can be viewed using the IBM Tivoli Storage Productivity Center stand-alone GUI? (Choose two.)
IBM Tivoli Storage Productivity Center > Topology
IBM Tivoli Storage Productivity Center > Job Management
A scheduled job is submitted and its status is not updated immediately on the Job Management panel. Additionally it is noticed that the Last Run Status column in the Schedules section of the Job Management is blank. What action is required to address this problem?
When accessing the Job Management panel immediately after a schedule is run,click Refresh in the Schedules section of the panel until theLast Run Status column is updated.
A customer runs CIMOM Discovery and keeps getting an error. The log indicates the Discovery service is not running. Where can the customer verify if the Discovery service is running?
Under Administrative Services > Services > Device Server
When viewing the definition of a schedule for a job, click the View Job History button to view the runs and jobs related to a schedule. As an example to view specifically the probe definition panel Job History, where is this located in the stand-alone GUI Navigation Tree?
IBM Tivoli Storage Productivity Center > Monitoring > Probes > TPCUser.Default Probe
In the IBM Tivoli Storage Productivity Center V5.1 Web-based GUI, where can a customer check for successfully completed tasks?
Home > (task)
What is the correct location for the Data Server configuration files for a default installation of IBM Tivoli Storage Productivity Center V5.1 on a UNIX or Linux server?
In provisioning a new storage subsystem, an administrator might accidentally violate a zoning- related policy. If the zoning-related configuration changes persist in the database, which IBM Tivoli Storage Productivity Center V5.1 feature can detect this policy violation?
Configuration Analysis tool