72-642 - TS: Windows Server 2008 Network Infrastructure, Configuring Certification

Go back to Microsoft

Example Questions

Your company has four DNS servers that run Windows Server 2008 R2. Each server has a static IP address. You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients. What should you do? Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A DHCP server is deployed on the network and configured to provide IPv6 prefixes. You need to ensure that when you monitor network traffic, you see the interface identifiers derived from the Extended Unique Identifier (EUI)-64 address. Which command should you run? You manage a domain controller that runs Windows Server 2008 R2 and the DNS Server server role. The DNS server hosts an Active Directory-integrated zone for your domain. You need to provide a user with the ability to manage records in the zone. The user must not be able to modify the DNS server settings. What should you do? Your network contains an Active Directory forest. The forest contains two domains named contoso.com and nwtraders.com. You have a DNS server named DNS1. DNS1 hosts Active Directory-integrated zones for contoso.com and nwtraders.com. You discover that client computers in contoso.com cannot use single-label names to access servers in nwtraders.com. You need to ensure that contoso.com computers can access nwtraders.com servers by using singlelabel names. What should you modify? Your company has a single Active Directory domain. The company network is protected by a firewall. Remote users connect to your network through a VPN server by using PPTP. When the users try to connect to the VPN server, they receive the following error message: "Error 721: The remote computer is not responding." You need to ensure that users can establish a VPN connection. What should you do? Your network contains a server named Server1 that runs Windows Server 2008 R2. You have a user named User1. You need to ensure that User1 can schedule Data Collector Sets (DCSs) on Server1. The solution must minimize the number of rights assigned to User1. What should you do? Your network consists of a single Active Directory domain. All servers run Windows Server 2008 R2. You have a server named Server1 that hosts shared documents. Users report extremely slow response times when they try to open the shared documents on Server1. You log on to Server1 and observe real-time data indicating that the processor is operating at 100 percent of capacity. You need to gather additional data to diagnose the cause of the problem. What should you do? Your network contains a DNS server named DNS1 that runs Windows Server 2008 R2. DNS1 hosts a zone named contoso.com. Dynamic updates are enabled on the zone. The network contains a server named Web1.contoso.com. All computers on the network are configured to use DNS1 as their DNS server. You need to ensure that users can connect to Web1.contoso.com by using the name portal.contoso.com. The solution must ensure that the users can connect by using portal.contoso.com if the IP address of Web1.contoso.com changes. Which type of resource record should you create? Your network contains a computer named Computer1. Computer1 is assigned an IP address of 192.168.1.112/26. Your company's corporate policy states that the first usable address in each subnet is allocated to the default gateway. You need to configure the default gateway for Computer1. Which address should you choose? Your company's corporate network uses Network Access Protection (NAP). Users are able to connect to the corporate network remotely. You need to ensure that data transmissions between remote client computers and the corporate network are as secure as possible. What should you do? You have a DHCP server that runs Windows Server 2008 R2. You restore the DHCP database by using a recent backup. You need to prevent DHCP clients from receiving IP addresses that are currently in use on the network. What should you do? Your network contains two Active Directory forests named contoso.com and fabrikam.com. You have a standalone Network Policy Server (NPS) named NPS1. You have a VPN server named VPN1. VPN1 is configured as a RADIUS client to NPS1. You need to ensure that users from both forests can establish VPN connections by using their own domain accounts. What should you do? Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. You have an IPv6-only infrastructure that has multiple subnets. You deploy a new server named Server1. You need to ensure that Server1 can communicate with the client computers in all of the internal subnets. The solution must use an address that is reserved for internal networks. Which address should you assign? Your company has an Active Directory forest. All domain controllers run the DNS Server server role. The company plans to decommission the WINS service. You need to enable forest-wide single name resolution. What should you do? Your network contains one Active Directory domain. You have a member server that runs Windows Server 2008 R2. You need to immediately disable all incoming connections to the server. What should you do? Your network contains a server that runs Windows Server 2008 R2. You plan to create a custom script. You need to ensure that each time the script runs, an entry is added to the Application event log. Which tool should you use? Your company has a main office and a branch office. The network contains two DNS servers named DNS1 and DNS2. DNS1 is located in the main office. DNS1 hosts a primary standard zone named contoso.com. The contoso.com zone is configured to use DNSSEC. DNS2 is located in the branch office. DNS2 is a caching-only DNS server. You need to ensure that client computers in the branch office can receive authoritative responses to queries for contoso.com if a WAN link fails. DNSSEC security must be maintained. What should you configure on DNS2 for contoso.com? Your network contains a server that runs Windows Server 2008 R2. You need to enable access-based enumeration (ABE) on a shared folder. Which console should you use? You need to document the following configurations of a server that runs Windows Server 2008 R2: System services Startup programs Hardware configuration Current CPU, network, disk, and memory utilization Which command should you run? Your network contains a server that runs Windows Server 2008 R2. The server has the Network Policy and Access Services server role installed. You need to allow only members of a global group named Group1 VPN access to the network. What should you do? Your network contains a DNS server named Server1 that runs Windows Server 2008 R2. You need to ensure that client computers can resolve IPv6 addresses to fully qualified domain names (FQDNs). Which type of resource record should you create? Your network contains an Active Directory forest. The forest contains two domains named contoso.com and eu.contoso.com. You install a Network Policy Server (NPS) named Server1 in the contoso.com domain. You need to ensure that Server1 can read the dial-in properties of the user accounts in the eu.contoso.com domain. What should you do? Your network contains a file server named Server1 that runs Windows Server 2008 R2. On Server1, you create a disk quota for volume E that limits storage to 200 MB for all users. You need to ensure that a user named User1 can store files that are larger than 200 MB on volume Your network contains an Active Directory domain. The network has DirectAccess deployed. You deploy the DirectAccess Connectivity Assistant (DCA) to all client computers. You need to ensure that users can view their DirectAccess status by using the DC Which two group policy settings should you configure? (Each correct answer presents part of the solution. Choose two.) Your company has an Active Directory domain named ad.contoso.com. All client computers run Windows 7. The company has recently acquired a company that has an Active Directory domain named ad.fabrikam.com. A two-way forest trust is established between the ad.fabrikam.com domain and the ad.contoso.com domain. You need to edit the ad.contoso.com domain Group Policy object (GPO) to enable users in the ad.contoso.com domain to access resources in the ad.fabrikam.com domain. What should you do? Your network contains one Active Directory domain. You have a member server named Server1 that runs Windows Server 2008 R2. The server has the Routing and Remote Access Services role service installed. You implement Network Access Protection (NAP) for the domain. You need to configure the Point-to-Point Protocol (PPP) authentication method on Server1. Which authentication method should you use? Your network contains a server named Server1.contoso.com. Server1 is located on the internal network. You have a client computer named Computer1 that runs Windows 7. Computer1 is located on a public network that is connected to the Internet. Computer1 is enabled for DirectAccess. You need to verify whether Computer1 can resolve Server1 by using DirectAccess. Which command should you run on Computer1? Your network contains a Network Policy Server (NPS) named Server1. You need to configure a network policy for a VLAN. Which RADIUS attributes should you add? Your network contains two servers named Server1 and Server2. Server1 and Server2 run the Server Core installation of Windows Server 2008 R2. You need to duplicate the Windows Firewall configurations from Server1 to Server2. What should you use? Your company has a single Active Directory domain. The company has a main office and three branch offices. The domain controller in the main office runs Windows Server 2008 R2 and provides DNS for the main office and all of the branch offices. Each branch office contains a file server that runs Windows Server 2008 R2. Users in the branch offices report that it takes a long time to access network resources. You confirm that there are no problems with WAN connectivity or bandwidth. You need to ensure that users in the branch offices are able to access network resources as quickly as possible. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) Your network contains a server that has the SNMP Service installed. You need to configure the SNMP security settings on the server. Which tool should you use? Your company has a main office and one branch office. The main office has a print server named Printer1. The branch office has a print server named Printer2. Printer1 manages 15 printers and Printer2 manages seven printers. You add Printer2 to the Print Management console on Printer1. You need to send an automatic notification when a printer is not available. What should you do? You perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1. You plan to capture all the LDAP traffic that comes to and goes from the server between 20:00 and 07:00 the next day and save it to the E:\data.cap file. You create a scheduled task. You add a new Start a program action to the task. You need to add the application name and the application arguments to the new action. What should you do? Your company has a network that has 100 servers. You install a new server that runs Windows Server 2008 R2. The server has the Web Server (IIS) server role installed. After a week, you discover that the Reliability Monitor has no data, and that the Systems Stability chart has never been updated. You need to configure the server to collect the Reliability Monitor data. What should you do? Your network contains a server named Server1 that runs Windows Server 2008 R2. You need to identify which processes perform the most disk writes and disk reads per second. Which tool should you use? You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network connections named LAN1 and LAN2. You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server must continue to respond to non-DHCP client requests on LAN2. What should you do? Your network contains a server named Server1 that runs Windows Server 2008 R2. You discover that the server unexpectedly shut down several times during the past week. You need to identify what caused the shutdowns and which software was recently installed. What should you click from Action Center? Your company is designing its network. The network will use an IPv6 prefix of 2001:DB8:BBCC:0000::/53. You need to identify an IPv6 addressing scheme that will support 2000 subnets. Which network mask should you use? Your network contains a domain-based namespace named DFS1. DFS1 has Windows 2008 Server mode enabled. You need to ensure that only files and folders in DFS1 that users have permissions to access are displayed. What should you do? Your company has a main office and 15 branch offices. The company has a single Active Directory domain. All servers run Windows Server 2008 R2. You need to ensure that the VPN connections between the main office and the branch offices meet the following requirements: ·All data must be encrypted by using end-to-end encryption. ·The VPN connection must use computer-level authentication. ·User names and passwords cannot be used for authentication. What should you do? Your network contains an Active Directory domain. The domain contains a print server named Server1. Server1 runs Windows Server 2008 R2. You need to ensure that users can locate all shared printers on Server1 by using Active Directory. What should you do from Server1? Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has Microsoft Exchange Server 2010 deployed. You schedule a backup of the server. You discover that the Exchange Server 2010 transaction log files are purged during the backup. You need to prevent the Exchange Server 2010 transaction log files from being purged. What should you do? Your company has a server that runs Windows Server 2008 R2. You have a new application that locates remote resources by name. The new application requires IPv6. You need to ensure that the application can locate remote resources by using IPv6. What should you do? Your company has a server named SRV1 that runs Windows Server 2008 R2. The default Print Services server role is installed on SRV1. The company wants to centralize printing on SRV1 for both UNIX and Windows users. You need to provide support to the UNIX users who print on SRV1. What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.) You have a server that runs Windows Server 2008 R2. You create a new quota template. You apply quotas to 100 folders by using the quota template. You need to modify the quota settings for all 100 folders. You must achieve this goal by using the minimum amount of administrative effort. What should you do? Your network contains an Active Directory forest. The functional level of the forest is Windows Server 2008 R2. You plan to deploy DirectAccess. You need to configure the DNS servers on your network to support DirectAccess. What should you do? Your network contains a server named Server1. Server1 has DirectAccess deployed. A group named Group1 is enabled for DirectAccess. Users report that when they log on to their computers, the computers are not configured to use DirectAccess. You need to ensure that the users' computers are configured to use DirectAccess. What should you do first? You are building a test environment to evaluate DNS Security Extensions (DNSSEC). You have a domain controller named Server1 that runs Windows Server 2008 R2 in your test environment. Server1 has the DNS Server server role installed. You need to configure Server1 to support the DNSSEC evaluation. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1 runs Windows Server 2008 R2. Server1 is located on the company intranet. You configure the WSUS Web site to use SSL. You need to configure a Group Policy object (GPO) to specify the intranet update locations. Which URLs should you use? Your company has a main office and a branch office. The network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 is located in the main office. Server2 is located in the branch office. You have a domain-based namespace named \\contoso.com\DFS1. Server1 is configured as the namespace server for \\contoso.com\DFS1. \\contoso.com\DFS1 has a folder named Folder1. The folder targets for Folder1 are \\Server1\Folder1 and \\Server2\Folder1. Users in the main office report that they view different content in Folder1 than users in the branch office. You need to ensure that the content in Folder1 is identical for all of the users. What should you do?