70-681 - TS: Windows 7 and Office 2010, Deploying

Go back to Microsoft

Example Questions

Your company has a single-domain Active Directory Domain Services (AD DS) forest. All client computers run Windows Vista and are joined to the domain. A file server named Fileserv1 runs Windows Server 2008 R2. You are preparing to migrate all client computers to Windows 7. You have the following requirements: Preserve the user settings on all client computers. Minimize the effect on network bandwidth during the migration process. You need to ensure that all requirements are met when you perform the migration. Which command should you run? Your company has a single-domain Active Directory Domain Services (AD DS) forest. All client computer objects are located in the Client Computers organizational unit (OU). All user objects are located in the Clients OU. Users do not have administrative privileges for their computers. You need to deploy Office 2010 Enterprise by using Group Policy. What should you do? You have a single-domain Active Directory Domain Services (AD DS) forest. Office Outlook 2007 is installed on all client computers. All client computers run the 64-bit version of Windows 7. You attempt to install the 32-bit version of Outlook 2010 by using a startup script. The installation fails. You need to install Outlook 2010 on all client computers. What should you do? You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows Server 2008 R2. You plan to use a server to deploy Windows 7 by using Lite Touch Installation (LTI). You need to ensure that this server has the required software for deploying Windows 7 by using LTI. You install Microsoft Deployment Toolkit (MDT) 2010. What should you install next? Your company uses System Center Configuration Manager 2007 R2 for operating-system deployment. You create an image to deploy Windows 7 and Office 2010 to client computers. A new security update for Office 2010 is released. You need to ensure that this security update is included in all future client computer operating system deployments that use the image. What should you do? Your company has a single Active Directory Domain Services (AD DS) forest with two domains. The HR domain is used exclusively by the human resources (HR) department. The other domain is used by all other departments. The company uses System Center Configuration Manager 2007 R2 for operating system deployments. You create a task sequence to deploy Windows 7 and Office 2010 to client computers. You need to ensure that the computer accounts for the employees in the HR department are joined to the HR domain. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) You are preparing to capture an image from a Windows 7 reference computer. The reference computer has a modem installed, and Windows 7 drivers are installed for the modem. You need to prepare the Windows 7 image so that the image does not contain the modem drivers. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows XP. You plan to deploy Windows 7 on all client computers. Custom settings for Internet Explorer must be applied periodically to all client computers. You need to ensure that users receive the Internet Explorer settings, and that users can change those settings if desired. What should you do? Your company has a single-domain Active Directory Domain Services (AD DS) forest. You are upgrading all client computers from Office 2003 to Office 2010. You are using Office Customization Tool (OCT) to prepare the Office 2010 deployment settings. While testing the deployment, you discover that users cannot open or edit specific Excel and Word documents that are located in multiple directories. Users receive the following error message: "Office has detected a problem with this file. To help protect your computer this file cannot be opened". You verify that users have the appropriate share and file permissions to edit the files. You need to ensure that users can edit the specific Word and Excel files and that all other Office files are validated before being opened. What should you do? Your network has one subnet for servers and one subnet for client computers. The subnets are separated by a router. In the server subnet, Server1 is a Windows Server 2008 R2 server that runs DHCP and DNS. Your deployment infrastructure is configured to allow computers in the client computer subnet to boot by using PXE. However, client computers that attempt to use PXE to boot are not able to connect to the deployment infrastructure. You need to ensure that client computers are able to connect to the deployment infrastructure by using PXE. What should you do? Your company uses System Center Configuration Manager 2007 R2 for operating system deployment. You have a client computer that has Windows Vista installed. You also have a new computer that does not have an operating system installed. You need to create a computer association between the Windows Vista computer and the new computer. What should you do first? Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You create a new Windows 7 image. You deploy the image to client computers. You need to activate the KMS client on the client computers before the client computers are shipped to users. Which command should you run? You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows XP Professional with SP3. You are upgrading all client computers to Windows 7 Professional by using automated installation scripts. You need to ensure that client computers are joined to the domain successfully during the deployment of Windows 7. In addition, user credential information must not reside in plain text. What should you do? You are deploying Windows 7 to client computers by using System Center Configuration Manager 2007 R2 and Microsoft Deployment Toolkit (MDT) 2010. You need to configure your deployment environment to fully automate the Windows 7 deployment process. What should you do? You have a single-domain Active Directory Domain Services (AD DS) forest. The network includes a Windows Deployment Services (WDS) server and a separate DHCP server. You set up a multicast transmission of Windows 7 and deploy Windows 7 on 100 new client computers via multicast. The multicast transmission average speed is 512 KBps. You deploy Windows 7 on an additional 50 new client computers and 2 older client computers via multicast. The multicast transmission average speed is 56 KBps. You remove the older client computers and restart the multicast transmission. The multicast transmission average speed is again 512 KBps. You need to ensure that Windows 7 is deployed on all client computers via multicast and that older client computers do not decrease the multicast average transmission speed for new client computers. What should you do? You capture an image of a Windows 7 client computer to use as a base image. You need to add device drivers to the base image in preparation for deployment to computers in a department that has unique hardware components. What should you do? All client computers in your company run Volume License editions of Windows 7 and Office 2010. All computers in the company are activated by using Key Management Service (KMS) hosts. The company is opening a new branch office. The new branch office will not have access to the corporate network or to the Internet for at least eight months. Windows 7 and Office 2010 have been deployed on the client computers for the new branch office, but are not yet activated and have not been shipped. You need to ensure that users in the new branch office will be able to use Windows 7 and Office 2010 without receiving prompts for activation. What should you do to the new branch office client computers? You plan to deploy Office 2010 to your company's client computers. You need to customize user settings before installing Office 2010 on client computers. Which command should you run? You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows Server 2008. All client computers run Windows 7. You use Microsoft Deployment Toolkit (MDT) 2010 for your deployment infrastructure. You need to configure your deployment infrastructure to use single-instance storage. Which command should you run? You have been deploying Windows 7 to client computers by using System Center Configuration Manager 2007 R2 integrated with Microsoft Deployment Toolkit (MDT) 2008 Update 1. You upgrade MDT 2008 to MDT 2010. You create a deployment task sequence that includes a Use Toolkit Package task. You deploy the task sequence to a client computer. The task sequence fails when the Use Toolkit Package task is executed. You need to ensure that the task sequence completes successfully. What should you do? You have a single-domain Active Directory Domain Services (AD DS) forest. All client computers run Windows 7. You copy a customized user profile to the folder network location \\SERVER1\Profile\Mandatory.v2. You need to configure the domain user accounts to use this location as their mandatory profile, and you must also ensure that all users can log on to their accounts even if the profile location is not available. To which location should you set each users account profile path? You are preparing for a Zero Touch Installation (ZTI) of Windows 7 using System Center Configuration Manager 2007 R2. You create a base image. You need to add a driver to this image while the image remains offline. Which tool should you use? You use Business Desktop Deployment (BDD) 2007 with Update 2 to prepare and deploy Windows Vista and Office 2007 to client computers. You install Microsoft Deployment Toolkit (MDT) 2010. The BDD deployment shares are not listed in the Deployment Workbench. You need to ensure that the BDD deployment shares can be used with MDT 2010. What should you do? You are using Windows Deployment Services (WDS) to deploy Windows 7 to your companys client computers. All servers in your network run Windows Server 2008 R2. The WDS server and the DHCP server are running on the same computer. You need to ensure that the client computers are able to connect to the WDS server by using PXE. What should you do first? Your company uses System Center Configuration Manager 2007 R2 for operating system deployment. You have a boot image that was previously used to deploy Windows 7 to client computers. You load the boot image on new client computers that contain new network adapters. The drivers for the network adapters are not installed after the boot image is loaded. You need to ensure that the drivers for the network adapters are properly installed during the loading of the boot image. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) You will use Microsoft Deployment Toolkit (MDT) 2010 to perform a Lite Touch Installation (LTI) of Windows 7 on client computers. You need to ensure that all computers can locate the LTI deployment shares. What should you do? You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows Server 2008 R2. You use Microsoft Deployment Toolkit (MDT) 2010 and System Center Configuration Manager 2007 R2 to deploy Windows 7 using Zero Touch Installation (ZTI). You have a Windows 7 reference computer that is encrypted using BitLocker Drive Encryption. You need to ensure that BitLocker Drive Encryption is disabled on deployed computers. What should you do? Your company has a single-domain Active Directory Domain Services (AD DS) forest. You will use Microsoft Deployment Toolkit (MDT) 2010 to deploy Windows 7 on all client computers. A WSUS server is used for deploying security updates. You need to ensure that security updates are applied to all client computers immediately after the deployment. What should you do for all client computers? You have a single-domain Active Directory Domain Services (AD DS) forest. You configure custom user profile settings on a reference computer and then create a Windows 7 image. You need to ensure that the custom user profile settings are used as the default user profile settings for the Windows 7 image. What should you do? You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows XP and Office 2003. You are preparing to deploy Windows 7 and Office 2010 on all client computers. You need to ensure that the default location for saving Office documents for all users is a specific network share. In addition, the location cannot be changed by users. What should you do? You are deploying Windows 7 Professional to all client computers in your company. The company uses Volume Licensing for all Windows operating systems. Different physical locations in the company require different Volume License Keys. You are creating unattended installation answer files for the Windows 7 deployments. You need to ensure that the correct Volume License Key is added to the appropriate configuration pass during the Windows 7 deployments. To which configuration pass of Windows Setup should you add the Volume License Key? You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows XP. You are preparing to deploy Windows 7 on all client computers by using the Sysprep tool. You need to ensure that users receive customized desktop settings the first time they log on. What should you do first? Your company is upgrading its client computers from Windows Vista to Windows 7. You attempt to manually install a third-party application on a new Windows 7 client computer. However, the installation fails when the application attempts to modify the registry keys. You need to identify which registry key is causing the installation to fail. What should you use? You deploy Windows 7 client computers by using System Center Configuration Manager 2007 R2. You need to review information about drivers that were installed during operating system deployment. Which log file should you view? You install the Windows Automated Installation Kit (Windows AIK). You use the ImageX tool to capture and apply Windows 7 images. You need to reduce the size of your Windows Preinstallation Environment (Windows PE) image. You build a Windows 7 image and a user profile. What should you do next? You have 100 client computers that have identical hardware configurations. You are preparing one of these client computers to use as a reference computer when you deploy Windows 7. You need to ensure that the device drivers are prevented from being reinstalled on each client computer during the deployment. What should you do? You are using Microsoft Deployment Toolkit (MDT) 2010 to perform a Lite Touch Installation (LTI) of Windows 7 on client computers. You create an LTI boot image. You need to control which device drivers are included in the LTI boot image. What should you do? You are using Microsoft Deployment Toolkit (MDT) 2010 to prepare for a Lite Touch Installation (LTI). You need to ensure that the deployment share allows users to set a unique local administrator password on their client computers during deployment. What should you do? Your company has a single-domain Active Directory Domain Services (AD DS) forest with 3,000 client computers that run Windows 7. The company has a main office and 50 branch offices. The company uses System Center Configuration Manager 2007 R2 to deploy applications to client computers. You need to deploy Office 2010 installation source files to each client computer, without installing Office 2010. How should you modify the Config.xml file? Your company uses System Center Configuration Manager 2007 R2 to distribute applications to client computers. You need to deploy Office 2010 in two different configurations: As an unattended installation, to include only Word, Excel, and Outlook. As an attended installation, to include only Word, Excel, Outlook, and OneNote. What should you do? You have a single-domain Active Directory Domain Services (AD DS) forest with two domain controllers that run Windows Server 2008 R2. Your network consists of two subnets. All client computers are located in one subnet. Both the DHCP server and the Windows Deployment Services (WDS) server are located in the other subnet. You need to ensure that client computers can be deployed over the network by using WDS. What should you do? Your company has a single-domain Active Directory Domain Services (AD DS) forest. All client computers run Windows XP. A Group Policy Object (GPO) is applied that restricts automatic logons on all computers that are joined to the domain. You use Microsoft Deployment Toolkit (MDT) 2010 to prepare an unattended installation of Windows 7 for deployment to all client computers. The deployments do not complete successfully. You need to ensure that the Windows 7 deployments complete successfully. Which file should you edit? You currently deploy the 32-bit version of Office 2010 to all of your company's client computers by using a custom settings file. The custom settings file is located in the Updates subfolder within the 32-bit installation folder named Folder1. You need to ensure that the current custom settings are applied when you deploy the 64-bit version of Office 2010 to computers in the engineering department. You create a new folder named Folder2 that contains the 64-bit installation files for Office 2010. What should you do next? You have a single-domain Active Directory Domain Services (AD DS) forest. You use System Center Configuration Manager 2007 R2 to deploy Windows 7. Your current deployment process performs a Light Touch Installation (LTI) of Windows 7 by using Microsoft Deployment Toolkit (MDT) 2010 with bootable stand-alone media. You need to change your deployment process to perform a Zero Touch Installation (ZTI) of Windows 7. What should you do? Your company has a single-domain Active Directory Domain Services (AD DS) forest. All client computers run Windows Vista. You are migrating all client computers to Windows 7 by using User State Migration Tool (USMT) 4.0. You perform several test migrations. You discover that a set of files with the extension .wxv, which should be restricted by NTFS permissions, were accessible to all users after the test migrations were completed. You need to ensure that the .wxv files are migrated with all NTFS permissions intact. What should you do? You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows Server 2008 R2. You add the Windows Deployment Services (WDS) role and the DHCP Server role to a server. You need to ensure that client computers that boot from the network locate the WDS server automatically. Which two actions should you perform on the WDS server? (Each correct answer presents part of the solution. Choose two.) You have a single-domain Active Directory Domain Services (AD DS) forest. All servers run Windows Server 2008 R2. You have a client computer named Client1 that runs Windows 7 and Office 2010. You begin capturing an image of Client1 by using Windows Deployment Services (WDS). When the WDS Image Capture Wizard prompts you to select the volume to capture, the list of volumes is empty. You need to ensure that you can capture an image of Client1 by using WDS. What should you do? Your company uses Key Management Service (KMS) for Microsoft Volume Activation. You have a Windows 7 image, which will be deployed to the companys client computers. You deploy the image to a client computer as a test. When you log on to the client computer, a warning states that the grace period for activation has expired. You need to prevent the grace period from expiring before the image is deployed to the client computers. Which command should you run? You are using Microsoft Deployment Toolkit (MDT) 2010 to prepare for a deployment. Your reference computer runs a 64-bit installation of Windows 7. Before you capture the reference computer, you add the Install Application task for installing the 32-bit version of Office 2010 to the task sequence. You run the task sequence and it does not complete successfully. You need to ensure that Office is installed successfully. What should you do? You have an Active Directory Domain Services (AD DS) environment. All client computers run Windows XP. You will use Microsoft Deployment Toolkit (MDT) 2010 to deploy Windows 7 to all client computers. The deployment project has the following requirements: User interaction must not be required for any deployment. You must be able to initiate deployments by using Windows Deployment Services (WDS). You need to meet the deployment project requirements when you deploy Windows 7 by using MDT 2010. Which application should you install?

Study Guides