70-659 - TS: Windows Server 2008 R2, Server Virtualization

Go back to Microsoft

Example Questions

You create a virtual machine (VM) named Server1. You export the VM to the C:\VMfolder. You need to import the VM from the correct folder. Which folder should you choose? You use Hyper-V Server 2008 R2 and failover clustering to host several virtual machines (VMs). You need to place a disk in maintenance mode. Which Windows PowerShell cmdlet should you run? Your company has an Active Directory Domain Services (AD DS) domain that includes an AD security group named Monitoring. You are configuring a Windows Server 2008 R2 Hyper-V server that hosts several virtual machines (VMs). You need to ensure that members of the Monitoring group can only stop and start VMs on the host server. What should you do? You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage virtual machines (VMs). You need to deploy a cloned VM and automatically assign it a different name. Where should you deploy the cloned VM? You have a Windows Server 2008 R2 Hyper-V server with a single network adapter that is connected to a virtual network. The virtual network is configured as External. Virtual machines (VMs) running on the server are not able to communicate with the host server over the network. You need to ensure that VMs running on the server are able to communicate with the host server over the network In Virtual Network Manager. What should you do? You create a virtual machine (VM) on a Windows Server 2008 R2 Hyper-V server. You plan to use this VM as the base image for new VMs. You need to ensure that you can import the base image multiple times on the original host server. In the Import Virtual Machine Wizard, which settings should you configure during each import process? You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain. You are configuring a virtual environment for the company. You have an iSCSI storage disk array that will be used to store virtual machines (VMs). You install a server named ABC-Host1 that runs a Server Core Installation of Windows Server 2008 R2 then install PowerShell 2.0 and the Hyper-V role. You need to start the Microsoft iSCSI Initiator Service on ABC-Host1 to enable the server to connect to the iSCSI storage disk array. How should you start the Microsoft iSCSI Initiator Service on ABC-Host1? You are configuring a Windows Server 2008 R2 server to support a virtual machine (VM) that uses a pass-through disk. You need to install the operating system on the VM. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) You add a Windows Server 2008 R2 server with the Hyper-V role installed to an existing Hyper-V failover cluster. After you move a virtual machine (VM) to the new cluster node, Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 reports the status of the VM as Unsupported Cluster Configuration. You need to be able to manage the VM by using VMM. What should you do? You have a Windows Server 2008 R2 Hyper-V failover cluster with a single iSCSI logical unit number (LUN) and one highly available virtual machine (HAVM). You manage the virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You monitor the environment by using Microsoft System Center Operations Manager 2007 R2. You configure a new virtual machine (VM) by deploying a VHD from the VMM library and placing the VHD on the existing iSCSI LUN. You create a HAVM configuration, and you attach the VHD to the configuration. VMM reports the status of the VMs as Unsupported Cluster Configuration. You need to be able to manage the VMs by using VMM. What should you do? You add the Hyper-V role to your Windows Server 2008 R2 Datacenter server. You see the following error in the Windows system event log: Hyper-V launch failed: No-execute (NX) or DEP not enabled on processor 0x0 (check BIOS settings). You need to be able to start the Hyper-V services. What should you do? You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to create and manage virtual machines (VMs). You attempt to create the first VM on a Hyper-V host by using Windows PowerShell. You receive an error message stating that the New-VM PowerShell cmdlet is not recognized. You need to be able to create VMs by using PowerShell. What should you do? Your company has a Microsoft Hyper-V Server 2008 R2 environment. You manage the virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. Virtual machines (VMs) will use Microsoft iSCSI Software Initiator to connect to the shared storage volumes within the guest operating system. You need to configure the VMM host server to optimize the network environment for iSCSI traffic. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) You manage Hyper-V host servers and virtual machines (VMs) by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. Developers are members of an AD security group named Development. You need to ensure that on a specific host server, members of the Development group can perform only the Create, Modify, and Remove VM management tasks. What should you do? You deploy a Windows Server 2008 R2 Hyper-V server with one virtual machine (VM). The host servers CPU resources are fully utilized by the VM. You need to ensure that the VM does not fully utilize the host servers CPU resources. What should you do? You install Windows Server 2008 R2 (Server Core Installation) on a server. You install the Hyper-V role and Windows PowerShell 2.0 on the server. When you attempt to run an iscsicli command, the command fails. You need to be able to immediately run the iscsicli command successfully. What should you do? You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain. You are configuring a virtual environment for the company. You install a server named ABC-Host1 that runs Windows Server 2008 R2 with Hyper-V. You have an iSCSI storage disk array that is used to store virtual machines (VMs). You want to install a VM that uses a pass-through disk. You attach the disk on ABC-Host1 and initialize the disk in Disk Management. When you create a VM using Hyper-V Manager on ABC-Host1, you discover that the physical disk is not available for selection in the drop down list of physical disks. What needs to be done to make the physical disk available for selection as a pass-through disk? You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. You manage a virtual environment that consists of a Windows Server 2008 R2 Hyper-V host server named ABC-VMHost1. You discover that when you take a snapshot of a virtual machine (VM) on ABC-VMHost1, you are not prompted to enter a name for the snapshot. How can you ensure that you are prompted to enter a name when creating a snapshot? Your company has a load-balanced Remote Desktop Session Host (RD Session Host) cluster. You are configuring the Remote Desktop Gateway (RD Gateway) role service on servers that run Windows Server 2008 R2. You need to centralize the storage of Remote Desktop connection authorization policies (RD CAPs). Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) You manage your Hyper-V environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You plan to perform a virtual-to-virtual (V2V) conversion of several virtual machines (VMs). In VMM, you need to configure the default placement options to consolidate the VMs on the fewest possible host servers. What should you do? You install Windows Server 2008 R2 (Server Core Installation) on a server. The server will store virtual machines (VMs) on a volume that is attached to the server by means of an iSCSI connection. You need to configure the server so that VMs can be stored on the iSCSI volume. Which two commands should you run? (Each correct answer presents part of the solution. Choose two.) Your environment includes a server that runs Windows Server 2008 R2 with the Hyper -V role installed. The server hosts several virtual machines (VMs). When you attempt to start a VM named VM1, you receive the following error message: The application encountered an error while attempting to change the state of 'VM1'. 'VM1' failed to start. Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The chain of virtual hard disks is broken. The system cannot locate the parent virtual hard disk for the differencing disk.' Failed to open virtual disk 'V :\ VM1\VM1.vhd'. A problem was encountered opening a virtual disk in the chain of differencing disks, 'IDE/ATAPI': 'The system cannot find the file specified.' Failed to open virtual disk 'V :\ VM1\VM1.vhd'. A problem was encountered opening a virtual disk in the chain of differencing disks, 'L :\ Base\W2K8R2EERCBASE+.vhd': 'The system cannot find the file specified.' You need to be able to start VM1. What should you do? You are consolidating your data center by using Windows Server 2008 R2 Hyper-V servers. You are performing virtual-to-virtual (V2V) conversions from Microsoft Virtual Server 2005 R2 and VMware ESX environments by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You need to place the virtual machines (VMs) to fully utilize the Windows Server 2008 R2 host servers. What should you do? You add the Hyper-V role to your Windows Server 2008 R2 Datacenter server. You see the following error in the Windows system event log: ° Hype-V launch failed: No-execute (NX) or DEP not enabled on processor 0x0 (check BIOS settings). You need to be able to start the Hyper-V services. What should you do? You are configuring a Windows Server 2008 R2 Hyper-V failover cluster. You configure five iSCSI logical unit numbers (LUNs) on shared storage, and you present them to the first server. Each LUN appears twice in the Disk Management console. You need to ensure that each LUN appears only once in the Disk Management console. What should you do? You are using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to perform a physical-to-virtual (P2V) conversion of a Windows Server 2008 R2 server. You need to prepare the server for the P2V conversion. Which two actions should you perform on the server? (Each correct answer presents part of the solution. Choose two.) You create a virtual machine (VM) on a Windows Server 2008 R2 Hyper-V server. The VM has a single VHD file that is connected to an IDE controller. You need to add five new virtual disks to the VM. You must minimize the amount of virtual hardware. What should you do? You use Hyper-V Manager to create a new virtual machine named VM1. VM1 has the configuration shown in the following display. You start VM1 and begin installing Windows Server 2008 R2 from a DVD. An error message appears, and you are unable to complete Windows Setup. You need to be able to install Windows Server 2008 R2 on VM1. What should you do? All servers on your companys network run Windows Server 2008 R2. You deploy Remote Desktop Services (RDS). The company has a load-balanced Remote Desktop Connection Broker (RD Connection Broker) cluster. You are adding a Remote Desktop Session Host (RD Ses sion Host) server to the cluster. You need to ensure that the RD Session Host server will receive only half of the RDS sessions. What should you do? You are configuring security for your Windows Server 2008 R2 Hyper-V environment. You need to configure the environment so that virtual machines (VMs) are restricted to a specific VLAN. What should you do? Your virtual environment includes a Windows Server 2008 R2 Hyper-V failover cluster. You manage the environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You need to configure the live migration network priorities for all virtual machines (VMs). What should you do? You manage your virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You monitor the environment by using Microsoft System Center Operations Manager 2007 R2. You have three Windows Server 2008 R2 Hyper-V servers in a failover cluster. You need to ensure that all virtual machines (VMs) are distributed automatically across the host servers, and that the VMs will automatically fail over to the most appropriate host server. What should you do? Your network includes the servers shown in the following table. Server n ame Operating s ystem Role s ervices S erver 1 Windows Server 2008 Standard TS Licensing S erver 2 Windows Server 2008 Enterprise Terminal Server You install an additional server named Server3 that runs Windows Server 2008 R2 Enterprise. You add the Remote Desktop Services (RDS) role, and you configure the Remote Desktop Session Host (RD Session Host) role service. You need to ensure that RDS client access licenses (RDS CALs) can be assigned to each Remote Desktop user. What should you do? You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. You manage a virtual environment that consists of a Windows Server 2008 R2 Hyper-V host server named ABC-VMHost1. ABC-VMHost1 stores the Virtual Hard Disk (VHD) files for it’s VMs on a directly attached disk storage array. The disk storage array appears as the D: drive on ABC-VMHost1. Some of the VMs hosted on ABC-VMHost1 also have directly attached physical disks. How should you backup a VM that has a directly attached physical disk? You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to perform physical -to- virtual (P2V) conversions . Your companys network includes computers that each run one of the following operating systems : Windows NT 4.0 Server with SP6a Windows 2000 Server with SP4 Windows Server 2003 with SP2 Windows Web Server 2008 R2 You need to choose the operating systems that can be converted by using the online P2V method. Which two operating systems should you choose? (Each correct answer presents part of the solution. Choose two.) You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain that includes servers running Windows Server 2008 R2, Windows Server 2003, Windows 2000 Server with SP4, Windows 2000 Server with SP3 and Windows NT Server with SP6a. The network includes a virtual environment consisting of virtual machines (VMs) running on Hyper-V host servers. A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and is used to manage the virtual environment. You are in the process of migrating the physical servers to virtual machines. You plan to perform physical-to-virtual (P2V) conversions using ABC-VMM1. Which of the following operating systems cannot be converted by using online P2V conversions? (Choose all that apply). You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. All servers run Windows Server 2008 R2 and all client computers Windows 7 Professional. You are installing a large virtual environment for the company. A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and will be used to manage the entire virtual environment. You have installed a Server Core Installation of Windows Server 2008 R2 Datacenter edition on 50 new servers. What is the easiest way to install the Hyper-V role on the 50 new servers? Your virtual environment includes Windows Server 2008 R2 Hyper-V servers. You are deploying a Remote Desktop Pool. You need to choose an operating system for the virtual machines (VMs) in the pool. Which two operating systems will achieve this goal? (Each correct answer presents a complete solution. Choose two.) A company has servers that run Microsoft System Center Virtual Machine Manager (VMM) 2008 R2, System Center Data Protection Manager (DPM) 2010, and Windows Server 2008 R2 with Hyper-V. A Hyper-V host has a virtual machine (VM) that uses a dynamic disk. You need to perform a backup of the VM configuration and its virtual hard disk. What should you do? Your environment includes Hyper-V and VMware ESX. You manage your virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You plan to perform a virtual-to-virtual (V2V) conversion of a virtual machine (VM) that is located on the ESX server. You start the conversion by using the Convert Virtual Machine Wizard. Communication between the destination host and the ESX server fails, and the conversion does not finish successfully. You need to ensure that the conversion finishes successfully. What should you change? You have a Windows Server 2008 R2 Hyper-V server. You take periodic snapshots of your virtual machines (VMs) when the VMs are not running. You delete several snapshots from the snapshot tree of a VM. The .avhd files that are associated with the deleted snapshots are not deleted from the volume where the VHD files are stored. You need to ensure that the .avhd files are deleted. What should you do? You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. You are installing a new virtual environment based on Microsoft Hyper-V. You have installed a Server Core Installation of Windows Server 2008 R2 on a server named ABC-VMHost1. How would you add the Hyper-V role to ABC-VMHost1? Your company has a Microsoft Hyper-V Server 2008 R2 environment. You manage the virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You are creating a virtual test environment by installing two child partitions. The test environment must be completely isolated from all production servers. You need to ensure that the child partitions can communicate with each other. Which connection type should you configure? You are configuring networking for a new Windows Server 2003 SP2 virtual machine (VM) in a Windows Server 2008 R2 Hyper-V environment. You need to configure the VM to achieve optimum network performance. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) You manage your virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 running on the internal network. You have several host servers in a perimeter network (also known as DMZ). You are installing VMM agents on the host servers. You need to ensure that the agents can communicate with the VMM server. Which two elements should you configure? (Each correct answer presents part of the solution. Choose two.) Your companys virtual environment includes Windows Server 2008 R2 Hyper-V servers. You manage the environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You need to provide a user with the ability to perform only the Create, Delete, Start, Stop, Pause, Resume, and Shut Down virtual machine (VM) management tasks on your host servers . What should you do? Your company has a load-balanced Remote Desktop Session Host (RD Session Host) cluster. You need to track user session information for the load-balanced RD Session Host cluster. What should you do? Your Hyper-V servers run Windows Server 2008 R2 Standard. You manage the virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You need to ensure that you can migrate child partitions between host servers. What are two possible methods that will allow you to achieve this goal? (Each correct answer presents a complete solution. Choose two.) You work as a Network Administrator at ABC.com. The network consists of a single Active Directory Domain Services (AD DS) domain named ABC.com. You have a virtual environment that consists of three Windows Server 2008 R2 Hyper-V host servers in a failover cluster. A server named ABC-VMM1 runs Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 and is used to manage the virtual environment. A highly available virtual machine (HAVM) named ABC-HAVM1 is hosted on the cluster. You add a fourth server to the cluster. You then move ABC-HAVM1 to the new server. You see an error on ABC-VMM1 saying that ABC-HAVM1 has a status of Unsupported Cluster Configuration. How should you change the configuration to enable you to manage ABC-HAVM1 using ABC-VMM1? You manage your Hyper-V environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You plan to perform a virtual-to-virtual (V2V) conversion of existing VMware virtual machines (VMs). You need to choose a type of virtual disk that is supported by VMM. Which type should you choose?