642-964 - CDCNIS - Cisco Data Center Networking Infrastructure Support
Go back to
Cisco
Example Questions
has installed these components: Two Cisco Catalyst 6500 Series Switches FWSM in each Catalyst 6500 Active/Active failover on FWSMs 4-Gbps trunk between the switches Failover packets between the FWSMs must be transmitted in a timely fashion. What must be configured on the trunk?
QoS
What information is displayed when you execute this command on the IDSM? Show settings
The management IP Address
What must you do to enable HTTPS as the access protocol on the NAM?
Install a strong crypto patch on the NAM, then enable the HTTPS server
network is configured as follows: NetFlow is on for all core switch interfaces The NAM receives NDE packets from each switch Reports show aggregate data for all interfaces How would you view data for specific interfaces on a given switch?
Create a custom NDE data source in Cisco Traffic Analyzer and specify the interfaces that you want to view
Which command enables virtual firewalls on the FWSM?
Mode Multiple
has installed an FWSM in the data center. Which feature must be configured to enable FTP to work?
Deep packet inspection
What can you do to obtain faster RPR+ failover?
Disable core dump on both supervisors
uses these file-oriented network applications FTP Web-based file repositories Windows and Linux File sharing How can you use the NAM to create a report showing total network traffic for these applications?
Add each application to the Cisco Traffic Analyzer protocol directory and create an application group with all of the applications
site is site up as follows: Aggregation-layer Cisco Catalyst 6500 Series Switches Redundant supervisors is deploying a new version of Cisco IOS Which supervisor redundancy mode or modes will allow an older version of Cisco IOS to be maintained on a standby supervisor?
RPR only
The IDSM management-interface IP Address can be configured from which prompt?
3(Config-hos-net)#
How can you configure the NAM to create a report that shows the percentage of traffic that is assigned to each DSCP service level?
Enable DiffServ monitoring using a user profile containing DiffServ aggregation groups
How would you configure a NAM to monitor and report the most heavily viewed sections of a website?
Enable URL monitoring. Define each desired URL as an application in the protocol directory
How do you configure an FWSM to use a backup RADIUS server?
Create an AAA server group and associate both RADIUS servers with the group
What will be the result of this command? Bgp graceful-restart
NSF is enabled for BGP
Which statement is correct regarding Layer 3 Etherchannels?
Multiple EtherChannels are used between a pair of switches
Which signature action can be configured only on an IDSM sensor in IPS mode?
Modify data in the packet
Which negotiation is initiated by setting an EtherChannel mode to auto on an interface?
To create an EtherChannel only if a PAgP packet is received
When configuring VLANs on the FWSM, how are VLANs associated with contexts?
Directly associated with multiple contexts
What must be configured on the FWSM to forward traffic to a filtering server?
All HTTP requests so that they are sent to the filtering server (url-server)
Which configuration is needed for the NAM to display per-protocol statistics for MPLS-tagged packets?
Configure the NAM to the "Parse MPLS tagged packet" option in Cisco Traffic Analyzer
What is the effect of executing the command intrusion-detection module 5 management-port access-vlan 10 on an IDSM?
Allows the IDSM to be managed by devise in VLAN 10
Which feature must you use to allow the FWSM to bridge spanning-tree BPDUs?
Ethertype ACLs
site is set up as follows: Aggregation-layer Cisco Catalyst 6500 Series Switches Redundant Supervisors is deploying a new version of Cisco IOS Which supervisor Redundancy mode or modes will allow an older version of Cisco IOS to be maintained on a standby supervisor?
RPR only
What is the implication of executing the command failover interface-policy 2 on an FWSM?
The FWSM will fail over when more than one VLAN interface fails
Which event action can be configured for a signature on the IDSM?
Log traffic between attacker and victim IP Addresses
In a Cisco Catalyst 6500 Series Switch, in which slot or slots should you install the NAM?
Any slot except a supervisor module slot
How many capture files can be stored on an IDSM?
1
Which step will configure high availability on two IDSMs in in-line mode?
Enable software bypass on the backup IDSM
A switch is running RSTP and is connected to a switch running 802.1D. What happens when a spanning-tree reconvergence is triggered?
The switch running RSTP reverts to 802.1D mode
How can with multiple FWSM contexts limit the number of connections that are permitted in each context?
Map the context to a class and apply resource limits to the class
How can you configure the NAM to view a list of all switches that are sending NDE packets?
Launch NetFlow Listening Mode form the Cisco Traffic Analyzer application
Which command must be issued to activate the FWSM firewall context?
config-url
How do you enable the use of Cisco Adaptive Security Device Manager on an Existing FWSM?
Enable the HTTPS Server
A POP3 and an SMTP server must be visible at the same address through an FWSM. Which type of NAT is required?
Static NAT
When is the current-config file updated on the IDSM?
After you exit configuration mode
This command is issued on an IDSM: access-list 10.0.1.0/24 What will be the result?
Allows devices on network 10.0.1.0/24 to manage the IDSM
An FWSM is running in transparent mode. Which command will prevent spanning-tree routing loops?
access-list [name] ethertype permit bpdu
What is required when configuring NTP on the IDSM?
Configure an MD5 key
How do you configure the management port VLAN on the NAM on a Cisco Catalyst 6500 Series Switch running Cisco Catalyst operating system?
No configuration is necessary