642-062 - Routing and Switching Solutions for System Engineers
Go back to Cisco
Which of these correctly identifies the six phases of the Cisco Lifecycle Services framework? Select the best response.
Prepare, Plan, Design, Implement, Operate, and Optimize -
In the Cisco Catalyst 6500-E Series chassis, what are three key chassis specifications? (Choose three.) Select 3 response(s).
three-slot chassis supports CEF720 line cards
is backward-compatible with all existing software versions
supports all existing supervisors, line cards, switch fabrics, and software releases
Which service component would you typically perform prior to the handover to the customer's operations organization and involves running system operations to ensure that the solution is ready for production? Select the best response.
Your customer needs to send encrypted data among three branch offices. You want to ensure that all devices in a group can successfully exchange encrypted packets. Which transport network augmentation will provide any-to-any IPsec connectivity to ensure that successful packet exchange occurs? Select the best response.
Which WAN type provides the most secure transport? Select the best response.
IPsec over MPLS VPN
You are designing a campus network and you want to provide a resilient default gateway to end services. Which campus network component should you use? Select the best response.
First Hop Redundancy Protocol
A customer wants to know about the benefits of the Cisco Validated Designs (CVDs). What are the two primary benefits to the customer that you should share? (Choose two.) Select 2 response(s).
CVDs reduce pre-production testing and accelerate deployment planning.
CVDs baseline-tested designs give deployment confidence.
You need a solution that provides high-level integrated security and seamless roaming. Which Cisco advanced technology should you implement? Select the best response.
What is a primary objective of the security architecture assessment? Select the best response.
to integrate routing and switching components
Which two of these tasks are important when designing for high availability? (Choose two.) Select 2 response(s).
identifying single points of failures
introducing redundancy to mitigate potential single points of failure
You are designing a campus network for your customer. You need to provide the customer with uplink connectivity because a single access switch is used to provide connectivity to more than one user group. Which access layer component should you deploy? Select the best response.
IEEE 802.1Q trunks
Due to strict privacy regulations, the hospital for which you are designing a solution needs to be certain that endpoint devices are interrogated for policy compliance. What can be used to assure that this is accomplished? Select the best response.
network access control
You have a customer who would like to upgrade their branch to Metro Ethernet. Which profile can be used as a migration profile to show the customer how to upgrade their branch? Select the best response.
double-tier branch profile
When designing a Cisco Enterprise WAN solution, which transport augmentation simplifies management of IPsec and provides support for IGPs? Select the best response.
Given a Cisco Catalyst 4500 Series Switch with redundant supervisors, what feature allows phone calls to remain up in the event of a supervisor failure? Select the best response.
During which phase is a proposal developed and delivered? Select the best response.
While designing a Cisco Enterprise WAN solution for your customer, you want to allow the usage of routing protocols across the tunnel in order to simplify routing information distribution and failure mitigation. Which transport network augmentation should you use? Select the best response.
GRE over IPsec
Your network includes a Cisco Catalyst 6500 Switch with an FWSM module. You need Layer 2 connectivity between two routers located on different firewall interfaces. Which feature will you need in order to provide this connectivity? Select the best response.
You have a client that currently has a single connection to an ISP. Your client is growing rapidly and would like to provide more capacity to the Internet without losing the ability to support high availability. Which methodology will support dual-homed connections to the same ISP and also support high availability? Select the best response.
What is the focus for Cisco for driving integrated networks? Select the best response.
Which two technologies are associated with the Campus PIN architecture? (Choose two.) Select 2 response(s).
IPv4 to IPv6
Layer 2 to Layer 3
Which security feature of a Cisco Catalyst 2960 Series Switch can be used to prevent clients from acquiring an IP address from unauthorized servers? Select the best response.
When designing a branch office solution for a customer, you want to share the pros and cons of the Internet WAN deployment model. Which are two characteristics of this model? (Choose two.) Select 2 response(s).
It provides the most cost savings.
It is the least secure of the three deployment models. -
Which Cisco advanced technology provides interconnected storage area networks so that you can reduce costs and improve reliability? Select the best response.
You have received an RFP from a potential client to design a network for a new corporate campus. This campus will encompass administration, sales, and R&D, and it will pull all the distributed IT functions into a new data center. The campus will consist of five buildings, each with four floors. The buildings will be linked via high-strand-count, single-mode fiber-optic cable to the new data center in building 3. Each building will have an MDF with at least one telco closet per floor and at least two runs of Category 5 UTP cable will go to each work location. Multistrand multimode will connect each telco closet to the MDF. Each MDF will have dedicated power circuits and be backed up by batteries in the basement of each building and a generator. The corporation will require 3500 TDM telephones and approximately 100 of these will be in a call center in building 2. The corporation needs to increase collaboration in the workforce. Employees need the flexibility to be able to move from one floor to another or from one building to another to accomplish their jobs. Managers also need this flexibility without losing connectivity to the corporate network or their phones. Building 4 will house R&D. This portion of the network requires connectivity to the Internet, but it also must restrict which employees have access to certain parts of the R&D network. The data center will house all connections to the Internet and to the PSTN. The corporation also provides access to customers for customized applications support. A network operations center will monitor and maintain the network on a 365/24/7 basis. Which advanced technologies will be applicable to answering this RFP? (Choose three.) Select 3 response(s).
In which phase is a systems acceptance test plan developed and documented? Select the best response.
Which Cisco PIN architecture uses Cisco Integrated Services Routers to support existing and emerging IP technologies, including IP telephony and video, point-of-sale terminals, kiosks, and RFID devices? Select the best response.
Which supervisor module can be used in the Cisco Catalyst 4510R chassis? Select the best response.
Which two of these protocols can be used to provide secure connectivity when connecting a branch office to the campus core? (Choose two.) Select 2 response(s).
L2TP over IPsec
What is a characteristic specific to the Cisco Enterprise Branch of One (Teleworker) PIN Architecture? Select the best response.
Cisco Unified Communications provides cost-effective access to a centralized system with voice and unified messaging services.
Which is a reliable network auditing methodology for discovering applications on the network and their usage characteristics? Select the best response.
Conduct a network usage study over a given period of time.
Which two tools can you use to manage and configure a Cisco Catalyst Express 500 Series Switch? (Choose two.) Select 2 response(s).
Cisco Network Assistant
Device Manager with embedded GUI
What are three important characteristics of the Cisco Catalyst 2960G-24TC switch? (Choose three.) Select 3 response(s).
does not support 802.3af PoE
uses the GBIC/SFP form factor for dual-purpose ports
provides a maximum forwarding bandwidth of 32 Gbps
You need switches that will provide ideal access-layer services for a small enterprise LAN environment as well as ensure maximum productivity and investment protection by supporting deployments of new applications such as IP telephony, wireless access, and video surveillance. Which switch series should you choose? Select the best response.
Cisco Catalyst 3560 Series Switch
While designing a Cisco Enterprise WAN for a company, you weigh the pros and cons of using Frame Relay and ATM. What are two possible cons of these solutions? (Choose two.) Select 2 response(s).
Neither Frame Relay nor ATM is IP-aware.
ATM does not include any encryption technology that can be managed from the enterprise side.
During the baselining process, what should you do immediately after you compile an inventory? Select the best response.
verify that the SNMP MIB is supported in the relevant core device
You need to document an existing network. What should you do first? Select the best response.
obtain organizational input
What are three characteristics of Cisco Validated Designs (CVDs)? (Choose three.) Select 3 response(s).
CVDs allow customers to take designs and get to production more quickly.
CVDs allow you to showcase innovation and next-generation technology.
CVDs provide proof-of-concept testing.
Which two of these features can be managed by the Cisco SDM application? (Choose two.) Select 2 response(s).
Your customer is a major international airport. The airport requires keeping connectivity options flexible for wireless and wired clients, video surveillance, and baggage distribution. At the same time, it requires isolating specific closed user groups such as air traffic control communication. Which design best suits the needs of your customer? Select the best response.
A three-layered design with a Cisco Catalyst 6500 Series Switch at the core layer.
What are two characteristics of the Cisco Enterprise WAN and MAN Architecture? (Choose two.) Select 2 response(s).
It provides cost-effective interoperation, and suits a variety of IT budgets and growth expectations.
It addresses the drive for heightened security.
What are three characteristics of the Cisco Validated Designs (CVDs) architectural selling approach? (Choose three.) Select 3 response(s).
This selling approach is based on customer requirements.
Integrated solutions are aligned to customer buying patterns.
The PINs have been pushed out to partners and have been well-received.